SSLO: SUPERVISE SAFE LIFTING OPERATIONS
SUPERVISE SAFE LIFTING OPERATIONS
Course Duration
Mode of Assessment
- Written Assessment (WA)
- 2 hrs (Closed Book)
- Practical Performance (PP)
- 1 hr
You must pass both the WA and PP to be considered to have successfully completed the Supervise Safe Lifting Operations Course.
Who Should Attend
This course is mandatory for individuals who are assigned to supervise lifting operation involving a mobile crane or tower crane or any other crane in the workplace.
Course Overview
At the end of the course, you will learn how to:
- Carry out lifting operations in a safe and efficient way
- Implement legislative requirements to ensure a safe working environment
- Investigate crane accidents and implement preventive efforts
Next available schedule
Pre-requisites
You MUST be 21 years old and have:
- Completed WSQ Perform Rigger and Signalman Tasks course
- Relevant experience in lifting operations at least 3 months [ supported by Company /Individual Application Letter to indicate periods of relevant experience in lifting operations]
And are assumed to be Medically fit and able to:
- Listen and speak English at a proficiency level equivalent to the Employability Skills (ES) level 4
- Read and write English at a proficiency level equivalent to ES level 4
- Manipulate numbers at a proficiency level equivalent to ES level 4
Course Outline
CE 1: Prepare to supervise safe lifting operations
- Comply to Risk Assessment
- Check to ensure adherence to legislation and organisational safe work procedures
- Participate in lifting plan, risk assessment and safe work procedure (SWP) briefing for lifting operations as a supervisor
- Check to ensure proper use of appropriate PPE and tag line for personnel in lifting operations
- Interpret load charts to verify the intended lift is within the Safe Working Load (SWL) of the crane
- Verify pre-lift inspection of crane, lifting gear and accessories
- Check to ensure proper selection of rigging equipment, lifting gears and accessories for lifting load
- Check to ensure proper rigging of load
- Check to ensure proper set up of communication equipment serviceability of communications equipment and functionality of radio channels for safe lifting operations
- Supervise cordoning off of lifting and lowering area using effective barricades with prominent warning signages
- Report and rectify any abnormalities/defects in the crane, lifting gear accessories and communications equipment according to organizational procedures
- Apply preventive measures and hazard control of lifting accidents according to organisational procedures
CE 2: Carry out supervision of safe lifting operations
- Implement safety practices and hazard control measures in workplace when carrying out Lifting Supervisor tasks
- Identify hazards during lifting operations
- Coordinate and supervise safe lifting operations involving cranes in a safe and proper manner
- Coordinate and supervise lifting according to lifting plan
- Respond to lifting accident and emergencies according to organizational Emergency Response Procedures (ERP)
CE 3: Supervise reinstatement of safe lifting operations
- Supervise the dismantling and restoring of rigging equipment, lifting gears and accessories
- Supervise good housekeeping of equipment and work area
- Supervise post-operational checks on communication equipment crane, lifting gear and accessories
- Check to ensure reporting of any damage and defects on communication equipment, crane, lifting gear and accessories
- Conduct accident investigation and analysis process of lifting accidents (where necessary)
Certificate Obtained and Conferred by
- A Statement of Attainment (SOA) will be issued by SSG for you who have been assessed as Competent
- Safety Pass will also be issued
- Upon meeting at least 75% attendance and passing the assessment(s), participants will receive a Certificate of Completion from NTUC LearningHub.
Additional Details
Medium of Instruction & Trainer
- Maximum Class Size: 20
- Written Assessment: 1: 20 (Class size)
- Practical: 1: 1
- Medium of Instruction: English
Additional Note
Assumed Knowledge and Skills
WPLN 4 and above
*Disclaimer
Participants of this course are advised to have at least ES WPLN Level 4 & above or equivalent as otherwise, the participants may find the course challenging to understand and pass the required assessments.
Price
|
Course Fee and Government Subsidies |
||||||
|
|
Individual Sponsored |
Company Sponsored |
||||
|
|
Non-SME |
SME |
||||
|
Before GST |
After GST |
Before GST |
After GST |
Before GST |
After GST |
|
|
Full Course Fee |
$320.00 |
$348.80 |
$320.00 |
$348.80 |
$320.00 |
$348.80 |
|
For Singapore Citizens aged 39 years and below |
$160.00 |
$188.80 |
$160.00 |
$188.80 |
$96.00 |
$124.80 |
|
For Singapore Citizens aged 40 years and above |
$96.00 |
$124.80 |
$96.00 |
$124.80 |
$96.00 |
$124.80 |
Funding Eligibility Criteria:
|
Individual Sponsored Trainee |
Company Sponsored Trainee |
|
|
Remarks:
|
Individual Sponsored Trainee |
Company Sponsored Trainee |
|
SkillsFuture Credit:
UTAP:
PSEA:
|
Absentee Payroll (AP) Funding:
|
Terms & Conditions apply. NTUC LearningHub reserve the right to make changes or improvements to any of the products described in this document without prior notice.
Prices are subject to other LHUB miscellaneous fees.
| Batch ID | Course Period | Course Title | Funding Available |
Duration (Hours) |
Session (Hours) |
Venue | Available Seats |
Online Payment |
|---|
What Others Also Enrolled In
SUPERVISE CONSTRUCTION WORK FOR WSH (SYNCHRONOUS E-LEARNING)
View detail
SUPERVISE MANUFACTURING WORK FOR WSH (CLASSROOM AND SYNCHRONOUS E-LEARNING)
View detail
MANAGE WORKPLACE SAFETY AND HEALTH IN SHIPBUILDING AND SHIP REPAIR
View detail
SUPERVISE MARINE WORK FOR WSH (CLASSROOM AND SYNCHRONOUS E-LEARNING)
View detail
SUPERVISE WORKPLACE SAFETY AND HEALTH FOR FORMWORK CONSTRUCTION
View detail