AWCS-M: APPLY WORKPLACE SAFETY AND HEALTH IN CONSTRUCTION SITES (MALAY)
APPLY WORKPLACE SAFETY AND HEALTH IN CONSTRUCTION SITES (MALAY)
Course Duration
Mode of Assessment
- Multiple Choice Questions (MCQ)
- Practical Performance
Who Should Attend
Construction workers or any other workers who need to enter a construction worksite
Course Overview
WSQ Apply Workplace Safety and Health (WSH) in Construction Sites is a mandatory WSH training course for all workers working in the construction industry. Construction workers are required to go through the course before they start work.
Course Schedule
Next available schedule
Course Objectives
At the end of the programme, you will be able to:
- Identify your own roles and responsibilities in a construction job
- Follow safe work procedures
- Adopt relevant risk control measures when Working-at-Height and respond to fire emergencies
Pre-requisites
These are the admission requirements:
- Must be above 18 years of age
- Have employment status as manual labour to carry out construction work in building and engineering construction worksites
- Be medically fit
- Be able to listen, read, speak and write English at a proficiency level equivalent to the Employability Skills (ES) level 2
- Be able to manipulate numbers at a proficiency level equivalent to Employability Skills (ES) level 2
- Have good organisational skills
- Be able to follow written and oral work instructions
Course Outline
Part 1: Identify own roles and responsibilities as an employee in a construction job
- Identify legal obligations in WSH requirements
- Identify own rights and responsibilities under WSH legal requirements
- Identify own rights and responsibilities under the Employment Act and Workplace Injury Compensation Act
Part 2: Follow safe work procedures in construction work
- Identify safety signs in a construction site
- Identify common workplace hazards in a construction site
- Identify relevant risk control measures to be implemented according to organisational procedures
- Follow Permit-to-Work (PTW) procedure according to organisational procedures
- Wear appropriate personal protective equipment (PPE) according to organisational procedures
Part 3: Follow safe Work-at-Height procedures
- Identify hazards when Working-at-Height
- Identify relevant risk control measures implemented to mitigate the hazards when Working-at-Height according to safe work procedures
- Check Work-at-Height equipment and safety devices according to safe work procedures
- Wear the appropriate PPE correctly for Working-at-Height according to safe work procedures
- Identify designated work access at scaffold structure in accordance with industrial guidelines
- Demonstrate the correct method of ascending and descending scaffold structure using appropriate vertical lifelines according to approved Work-at-Height Code of Practice
- Demonstrate the correct method of 100% tie-off according to approved Work-at-Height Code of Practice
- Demonstrate the correct method of traversing across the scaffold work platforms using horizontal lifeline or equivalent according to approved Work-at-Height Code of Practice
Part 4: Respond to fire emergencies
- Follow fire evacuation procedures based on an incident at the site in accordance with organisational firefighting procedures
- Identify correct types of fire extinguishers to use in the event of a fire
- Apply the correct techniques to extinguish a fire according to established organisational firefighting procedures
Certificate Obtained and Conferred by
- Certificate of completion from NTUC LearningHub
Safety Pass from NTUC LearningHub.
Upon meeting at least 100% attendance and passing the assessment(s), participants will receive a Certificate of Completion from NTUC LearningHub.
Note: Validity of the Safety Pass is subjected to the years of working experience in the related industry within Singapore. If you have more than 6 years of experience, you will receive 4 years validity, and 2 years validity for less according to the Worker Training Record.
Additional Details
Price
Course Fee |
|||||
|
Individual Sponsored Trainee |
Company Sponsored Trainee |
|||
before GST |
after GST |
before GST |
after GST |
||
Full Course Fee |
$105.00 |
$114.45 |
$105.00 |
$114.45 |
Terms & Conditions apply. NTUC LearningHub reserves the right to make changes or improvements to any of the products described in this document without prior notice.
Prices are subject to other LHUB miscellaneous fees.
Batch ID | Course Period | Course Title | Funding Available |
Duration (Hours) |
Session (Hours) |
Venue | Available Seats |
Online Payment |
---|
What Others Also Enrolled In
APPLY WORKPLACE SAFETY AND HEALTH IN PROCESS PLANT - BENGALI
View detailAPPLY WORKPLACE SAFETY AND HEALTH IN PROCESS PLANT (MANDARIN)
View detailAPPLY WORKPLACE SAFETY AND HEALTH IN PROCESS PLANT - MALAY
View detailAPPLY WORKPLACE SAFETY AND HEALTH IN PROCESS PLANT - TAMIL
View detailAPPLY WORKPLACE SAFETY AND HEALTH IN CONSTRUCTION SITES (MANDARIN)
View detail