BOSAHK: AHK I4.0 INDUSTRY SPECIALIST
AHK I4.0 INDUSTRY SPECIALIST
Course Duration
Mode of Assessment
Who Should Attend
- This training programme is applicable across all industry sectors.
- These training programmes are suitable for executives and managers who are responsible for driving continuous improvement and business development initiatives through technology applications.
Course Overview
The German federal standardised training programme is a comprehensive certificate course that is both offered and licensed by the extensive network of German Chambers of Industry and Commerce. This esteemed programme equips participants with the essential skills required to effectively contribute to the development, selection and implementation of cutting-edge methods and technologies specifically tailored for the dynamic realm of Industry 4.0 within various workplace settings. Upon completion of this training, individuals who possess diverse initial qualifications and valuable experience will have acquired the proficiency necessary to autonomously execute and supervise projects related to Industry 4.0, thereby demonstrating their ability to provide valuable guidance and coordination throughout the entire process.
This further education training course will enable the certificate holders to identify the potential of Industry 4.0 in the production and logistics departments and to devise specific proposals for implementation. Depending on their experience and qualification (e.g. working with different programming languages, managing projects), they will be able to implement/manage Industry 4.0 projects. The various subjects covered in the course equip Industry 4.0 proposals in many different areas of production. A task from their own company can be chosen for the final assignment. Participants gain extensive knowledge in the technologies and applications involved in implementing industry 4.0 in production and logistics.
Below are Additional Support Available:
- Additional SkillsFuture Credit (Mid-Career Support)
- Workfare_Absentee Payroll
- Workforce_Training Allowance
- Workfare_Training Commitment
Absentee Payroll (AP) for employer-sponsored trainees |
95% of hourly basic salary, capped $13 per hour. |
Training Allowance (TA) for self-sponsored trainees |
$6 per training hour, capped at 180 training hours per WSS eligibility period |
Training Commitment Award (TCA) for all qualifying trainees |
|
Please click here to know more information.
Course Schedule
Next available schedule
Course Objectives
The German federal standardised training programme provides specialists with the necessary skills to support devising, selecting and implementing methods and technologies for Industry 4.0 in workplace environments. Depending on their initial qualification and experience these specialists will be able to carry out and coordinate projects independently:
The course focuses on:
- Understanding the fundamentals of Industry 4.0
- Realizing new opportunities for new business models by implementing Industry 4.0
- Understanding of the system topology and entire process chain
- Specific Industry 4.0 applications and practical implementation examples from different, production areas, ranging from manual workplaces to fully automated production and being able to transfer these examples into the own production
- Data security in the implementation of Industry 4.0
- Insight into future working methods in the digital world
In Partnership with
Pre-requisites
- Applicants should possess a degree in any discipline; or
- Diploma / Higher Nitec / Nitec with a minimum 3 years of related working experience
Course Outline
Construction of the AHK i.40 Industry Specialist Certificate course
Module 1: Understanding Industry 4.0
- Basics of Industry 4.0
- Prerequisite for Industry 4.0
- Typical fields of application
- Recognizing Industry 4.0 as an industrial revolution
- Current trends in Industry 4.0
Module 2: Networked business models in production and logistics
- Exploration of higher technologies
- Parameters for identifying technology components
- Business Model
- Data Transmission
- Supply Chain
- Digital logistics and networking within the digital supply chain
Module 3: Technologies for implementing Industry 4.0 – cyber-physical systems
- Introduction to cyber-physical systems
- Sensor, actuator, and processor technologies
- Data analysis techniques and data sources
- Software applications essentials
- Man-machine interface dynamics
Module 4: Designing work and organisation organisational considerations in the age of digital change
- Interplay between humans, technology, and organizations
- Comparison: Traditional vs agile working methods
- SCRUM methodology
Module 5: Final assignment, presentation and oral examination
- Apply knowledge by implementing an i4.0 project and passing an exam to attain an international certificate
The further education training programme “Industry 4.0 Specialist (IHK)” was developed under the responsibility of the IHK Stuttgart Region, the IHK Education and Training Centre of the Stuttgart Region and the IHK for the Palatinate Region, Ludwigshafen, in collaboration with the experts from the companies and organisations.
Certificate Obtained and Conferred by
- 100% Attendance and Pass the Final Assessment
- Participants will be awarded Singaporean-German Chamber of Industry and Commerce (AHK) Certificate.
- Participants will be awarded NTUC LearningHub & Bosch Rexroth Joint Certificate of Completion.
- 75% Attendance and Pass the Final Assessment
- Participants will be awarded NTUC LearningHub & Bosch Rexroth Joint Certificate of Completion.
Additional Details
Medium of Instruction: English
Trainer to trainee ratio: 1:16
Mode of Delivery: Physical class
Price
Course Fee and Government Subsidies |
||||||
|
Individual Sponsored |
Company Sponsored |
||||
|
Non-SME |
SME |
||||
Before GST |
After GST |
Before GST |
After GST |
Before GST |
After GST |
|
Full Course Fee |
$5,500.00 |
$5,995.00 |
$5,500.00 |
$5,995.00 |
$5,500.00 |
$5,995.00 |
For Singapore Citizens aged 39 years and below |
$1,650.00 |
$1,798.50 |
$1,650.00 |
$1,798.50 |
$550.00 |
$698.50 |
For Singapore Citizens aged 40 years and above |
$550.00 |
$698.50 |
$550.00 |
$698.50 |
$550.00 |
$698.50 |
Funding Eligibility Criteria
Individual Sponsored Trainee |
Company Sponsored Trainee |
|
|
Remarks
Individual Sponsored Trainee |
Company Sponsored Trainee |
SkillsFuture Credit:
UTAP:
Training Allowance (TA) for self-sponsored trainees:
PSEA:
|
Absentee Payroll (AP) Funding:
|
Terms & Conditions apply. NTUC LearningHub reserves the right to make changes or improvements to any of the products described in this document without prior notice.
Prices are subject to other LHUB miscellaneous fees.
Batch ID | Course Period | Course Title | Funding Available |
Duration (Hours) |
Session (Hours) |
Venue | Available Seats |
Online Payment |
---|
What Others Also Enrolled In
DIGITAL WORKPLACE: BUSINESS PROCESS AND WORKFLOW AUTOMATION – DESIGN, DEPLOY AND MANAGE (SYNCHRONOUS E-LEARNING)
View detailFOUNDATION OF AUTOMATED SYSTEM USING ROBOTICS – DESIGN AND DEPLOY
View detail